Spindles

TMD Components

Infrastructure

  • State-of-the-art manufacturing facility
  • Multi-stage inspection of spindles, guaranteeing all quality parameters

Spindle Top Parts

  • Spindle Top Parts ensure excellent fitment of bobbin tube over its entire length for stable running of spindles
  • Specially drawn aluminium rods ensure strength and suitability of the Top Parts

M 18.5 HS Spindles with CS1 Inserts

  • Capable of running spindle speed up to 25,000rpm (mechanically)
  • The above inserts comprise of neck bearing and a hydrodynamic radial bearing with movable flat disc, to absorb axial forces and ensure low noise level
  • The reduced shaft diameter of 6.8 mm reduces the bearing forces and permits wharve diameter up to 18.5 mm
  • Sandwich design top part ensures higher rigidity and lower spindle vibration levels
  • Low energy consumption, due to reduced wharve diameter and the use of suitable lubrication oil
  • Operatorriendly single pieceinger brake

Recommendations

  • Optimum relation between ring diameter and tube diameter Mean bare bobbin diameter / Ring inner diameter = 0.45 to 0.5
  • Optimum relation between ring diameter and tube length Ring inner diameter / Tube Length = 0.2 to 0.25
Parameters Range
Spindle Type M18.5 HS
Wharve Dia 18.5 mm
Insert CS-1
Top Part Sandwich
Max. Speed 25,000 rpm
Lift 160,170,180& 190

Taper – 1:40 DUI in mm – 18, 20 & 22

COPYRIGHT © 2018 LMW TEXTILE MACHINERY DIVISION. ALL RIGHTS RESERVED

Made by Fibroin